February 15, 2018 | admin |

Cut Resistance: The No Nerds Allowed Webinar Recap

Relax, nerds… you’re allowed to listen to our webinar on cut resistance.


Listen to The No Nerds Allowed Webinar Now!


When we say ‘no nerds allowed,’ we mean ourselves, as presenters.

Working in the safety business, you learn to eat, breathe and sleep safety. Sometimes that means that you get a little too excited talking about testing methods and engineered yarns.

So when Michael Johannesson and I got together to develop this webinar, we made a sacred pact… We would suppress our nerdy glove-loving vocabulary and provide information that glove wearers actually want to know.

We’ve included a recording of the webinar as well as the top takeaways from the presentation.

cut resistance: the no nerds allowed webinar


1) The Changes to the Levels of Cut Resistance:

There’s a standard for everything — from toilet bowl seats to steel rivets — and the cut resistance of glove is no different.

In 2016, the standards that measure the cut resistance of protective clothing were updated. The most notable change was that the levels of cut resistance increased from 5 levels to 9 levels.


How Michael Explains It:

There was confusion in the old levels of cut resistance, particularly in the range for level 4 — 1,500 grams to 3,499 grams of cut protection. Under the new standard, that’s divided between level A4, A5 and A6.

That means that you could have two level 4 gloves, one at the bottom of the range and one at the top of the range but, on paper, they would be considered to give you the same level of cut resistance.

changes to the ASTM ANSI standards


2) The Glove With the Highest Rating Is Not Necessarily Best:

Just because the glove exists doesn’t mean that you need it. There are industries, like pulp & paper, where the cut hazards are so extreme that a glove with a level A9 rating is needed.

But before jumping right to the highest level of cut protection, look at your workplace, consider the factors that are involved and really consider if it’s necessary.

If you aren’t sure of how to start, use an A4 rated glove as your benchmark.


3) What Makes a Glove Cut Resistant?

At it’s most basic, a cut-resistant glove is made out of one of two yarns:

      High Performance Polyethylene (HPPE):

98% of the gloves on the market use at least one of these two fibers. Both materials have similar cut-resistant properties, so choosing the fiber that is best for you comes down to the specific job you’re doing.

HPPE and Para-Aramid


When Michael Says to Use Gloves Made From Para-Aramid:

  • It won’t burn or support flame or combust
  • It has good resistance to heat


When Michael Says to Use Gloves Made From HPPE:

  • Better for jobs where contamination is a concern because it can be laundered, bleached and sanitized
  • Keeps your hand about 10 degrees cooler, making it a better option in hot conditions


What Else Will the No Nerds Allowed Webinar Teach You?

  • The Evolution of Cut-Resistant Gloves
  • The Truth About Cut-Proof Gloves
  • How To Choose the RIGHT Cut-Resistant Glove For Your Workplace

The No Nerds Allowed Webinar also featured a question and answer period for any additional questions that viewers had.


Want More Information for Choosing Gloves?

Read our interview with Michael “The 7 Dangers of Rogue Glove Buying.”


About admin